Articles / Sealed Beam Headlight Conversion Installation Guide
Sealed Beam Headlight Conversion Installation Guide
Are you tired of replacing the entire Sealed Beam Headlight unit every time it went out? You can easily convert the old Sealed Beam Headlight to H4 halogen light bulbs conversion. This is a quick install guide for Sealed Beam Headlight Conversion, specific vehicle model may varies.
-
Remove any exterior frame or ring that may surround the Sealed Beam Headlights.
-
Remove the retaining screws that hold the factory sealed beam headlights, most rectangular sealed beam headlights have 4 screws and round sealed beam headlights have 3 screws.
-
Remove the factory sealed beam headlights by disconnecting the 3-prongs wiring connector off the back.
-
Install the Sealed Beam Headlight Conversion, and connect the 3-prongs wiring connector. If it features with Halo or LED, extra wiring is required, please read Halo and LED Headlights Wiring Guide.
-
Hold the Sealed Beam Headlight Conversion, re-install the retaining screws, and any exterior frame or ring.
-
Finally, test all functions before driving. Congratulation, you have finished installing Sealed Beam Headlight Conversion.
